Loheat products - Farm & Dairy Division

Loheat Dairy & Farm products : Fill & Heating options

VAC Pac & 24 Hour Timeclock Pac

Includes external vacuum operated pinch valve to eliminate cold water entry when drawing off hot water, digital thermostat and sensor probe to set and display temperature, 24 hour timeclock for control of the heating cycle + pilot light to indicate power is on.


Dual Wash Pac

2 x 24 hour timeclocks fitted on the front of the heater to allow separate control of the heating element and cold water fill via a heavy-duty external solenoid valve mounted below the header tank. Digital thermostat & sensor probe to set and display temperature + pilot light to indicate power is on.

 


DX Pac

DX PAC – fitted 0.5hp hot water pump delivering 20 litres/minute @ 20psi. Heating cycle controlled by a 24 hour or 48 hour clock for every day or every other day collection (please specify when ordering). A rod thermostat controls the temperature, and the analogue thermometer reads it, + pilot light to indicate power on. Fully compliant with water Byelaws and fitted with a Type A air gap in the header tank.


Time Delay Relay Pac for DX Water Heaters

'Time Delay' Relay Pacs will completely eliminate the ingress of cold water during the tank cleaning cycle. Includes heavy duty solenoid fitted under the header tank and a time delay relay as shown left.

  • Factory fitted pac ( left)

 

  • Retrofit (right) for heaters with the cold fill already controlled by a solenoid

Full Remote Pac

Remote wall mounted control box with digital thermostat & sensor probe for setting and reading the temperature, plus two 24 hour clocks for separate control of the heating element and cold water fill via a heavy duty solenoid fitted below the external header tank.  Pilot light to indicate power on is fitted to the front of the heater.